TMM Telekom Makine Madencilik San. ve Tic. Ltd. Şti. (TMM), which is one of the leading engineering company dealing with fiber
Installation of micro cables at the access and distribution locations has been increasing all over the world. There is a global trend to use micro cables (small size cables) in order to utilize existing ducts or small diameter new ducts, which in turn will reduce civil works cost. Reduced diameter ducts are used for deployment of flat indoor cables in the last mile. Deployment of micro cables is a challenge considering the small size of the cables, which are easy to get damaged if not handled with care.
Flat drop cables such as low friction indoor/outdoor drop cables are suitable and convenient at the last mile that connects the nearest drop closure with the subscriber. For underground duct installation, pulling the cables through duct may cause damage to the reduced size micro cables. TMM’s comes to the help of installation crew by introducing this micro cable blowing machine. TMM developed this blowing machine through their practical experience in the deployment field. Also they utilized the feedback received from their customers.
Elektrofok can be used to blow cables having dimensions starting from 1 millimeter to 5 millimeters. This blowing machines consists of four major parts such as 1.) Cable Blowing Section 2.) Control Panel Section, 3.) Air Regulation Section and 4.) Tripod Stand for leveling and direction control.
Around 15 bar air pressure is required, which further depends on other factors of deployment. Maximum cable blowing speed is 50 meter per minute, which means the deployment of a 500 meters of micro cable will be finished in 10 minutes time.
TMM Telekom Makine Madencilik San. ve Tic. Ltd. Şti.
Erenköy Mah. İğdelidere Cad. 1494.Sok. No:12 38050 Melikgazi/Kayseri, TÜRKİYE
Tel : +90 352 222 82 03 Fax : +90 352 222 82 01
e-mail : firstname.lastname@example.org Web : www.t-mm.net